Information leaflets and folded sheets

Handling patient information leaflets and folded sheets in similar formats

A common task in the printing industry is the production of large numbers of small folded sheets. This is a big burden on the operator, because of the monotony of the work. With Kerberos KF, the operator can monitor several machines at the same time, and the machine service is fully handled by the robot. This solution can be flexibly adapted to the customer’s request. Or, in the future, you can move the robot to a different location and reprogram it for a different task by mounting a different gripper on it.

Kerberos KF robots can pack patient information leaflets, instructions, point collectors, product descriptions all day long without stopping. The folded sheets can be placed either in a thin paper box or in an intermediate container. You can also place these paper boxes in another cardboard box and then place the finished boxes on a pallet.

Higher utilisation



Light weight, easy handling and built-in safety features allow you to easily move the robot cell to another machine.

The cobot requires no periodic servicing and is maintenance-free. (No need to grease, stop making.) Hungary has an excellent service network of collaborative robot manufacturers.

  • several sizes
  • you can set how many paper sheets to take
  • even for handling trays and boxes
  • one robot can have several types of grippers
  • Suitable for moving 5 kg
  • 40 Nm/sec speed of movement
  • easily interchangeable fingertips
  • fully electric, so no external air supply is required

The Kerberos KF can communicate with the folding machine via a digital link and detect the arc being punched out, so that it always picks up exactly the right amount of pieces. An optical sensor allows the detection of out-of-round arcs. This means that the robot picks up the quantity set on the drive and fills it into the box. The optical sensor makes it easy to connect to any folding machine.

The Kerberos KF is placed on a table that is easy to move and can be precisely fixed, allowing the robot to be connected to other machines.

We hand over the robot with software and a display that allows you to easily teach a new task!

The robot is pre-programmed for the basic task, but the customer can easily change the program parameters in the ready-to-use operator interface. The cobot is easy to program and can be easily trained for other tasks.

During the individual safety risk analysis, we take into account the shape of the gripper, the speed of the robot and the working environment. After that, we choose safety devices so that the robot cannot cause injury.

We add a safety certificate to the robot cell.

Request an appointment for an online consultation!

Your consultant:

Ákos Dömötör